Revere, Massachusetts Plumbing Local Permit Ordinances and Codes
Revere, Massachusetts Plumbing Permit Ordinances
In Revere, Massachusetts, the authority having jurisdiction for plumbing permits is the Building Department. They are responsible for interpreting and enforcing the State Building Code, the Revere Zoning Ordinance, and relevant portions of the City Code. Plumbing permits are issued in accordance with Massachusetts General Laws (MGLs), specifically MGL 142-13.
Local Zoning and Fee Nuances
Plumbing and gas permits in Revere have specific fee structures. As of September 1, 2007, these fees include an application fee of $50 per type, with an additional $5 per fixture. Re-inspection fees are also $50. It is important to note that working without the required permits can lead to doubled fees. The Building Department also issues other permits, including building, gas, electrical, fire alarm, and certificates of occupancy. Information regarding the Zoning Ordinance and floodplain locations can be obtained from the Building Department.
Permit applications for the Building Department, which include plumbing permits, are now primarily handled online through the City's e-permitting portal at www.revere.org/permitting. Licensed contractors must upload a copy of their license and a Workers' Compensation Affidavit.
Resources to Learn More
Because Revere is located within Suffolk County, the following broader county regulations may also apply to your project:
Massachusetts, Suffolk County Plumbing Permit Regulations and County Ordinances for Unincorporated Areas
Suffolk County, Massachusetts Plumbing Permit Requirements
In Massachusetts, plumbing permits are generally handled at the local municipal level, rather than by county departments. The Massachusetts State Building Code (780 CMR) and the Massachusetts State Plumbing Code (248 CMR) provide the overarching regulations. A plumbing permit is required for all plumbing work, including installation, alteration, removal, replacement, or repair, with exceptions for minor repairs like fixing a leaky faucet or clearing a blocked drain. Permits are issued only to licensed plumbers.
For commercial plumbing work, a licensed Master Plumber must submit a permit application to the local inspectional services or building department. No work can begin without an issued permit.
County-Level Jurisdiction
While Suffolk County itself may not have a direct "Building & Safety Division" that issues plumbing permits for all properties within its boundaries, individual cities and towns within Suffolk County will have their own building departments or inspectional services responsible for permit issuance and oversight. For example, Boston has a system where Counter 1 handles building, electrical, and plumbing permits.
Rules for Properties in Unincorporated Areas
Massachusetts law primarily delegates building and plumbing permit authority to individual municipalities. There is no specific mention of "unincorporated areas" within Suffolk County having a different permit process. Therefore, properties in any area within Suffolk County would fall under the jurisdiction of the nearest city or town's building department for permit requirements.
Key Requirements for Plumbing Permits in Massachusetts:
- Permits are required for most plumbing work, excluding minor repairs.
- Permits must be obtained by a licensed plumber.
- Applications typically require detailed project information and plans.
- Inspections are a crucial part of the process, with rough-in and final inspections often required.
- All work must comply with the Massachusetts State Plumbing Code (248 CMR).
Resources to Learn More
The following statewide building codes and regulations apply universally to all jurisdictions within Massachusetts:
Massachusetts Plumbing Legislation, Codes, and Guidelines
Massachusetts Plumbing Code and Legislation
Unlike many states that adopt national model codes such as the International Residential Code (IRC) or International Plumbing Code (IPC), Massachusetts maintains its own state-authored plumbing code. The governing regulation is 248 CMR 10.00: Uniform State Plumbing Code. This code is specifically designed to meet the Commonwealth's unique requirements, including those for the biotech, research, and pharmaceutical industries, and it is harmonized with other state regulations and agencies.
Regulatory Authority
The primary agency responsible for setting, maintaining, and enforcing these standards is the Board of State Examiners of Plumbers and Gas Fitters, which operates under the Massachusetts Division of Occupational Licensure. The Board is established under Massachusetts General Laws (M.G.L.) Chapter 142, which provides the statutory framework for the supervision of plumbing and the licensing of plumbing professionals in the state. The Board is responsible for licensing, conducting examinations, granting variances, and overseeing the periodic updates to 248 CMR 10.00.
Resources to Learn More